KITO ER2 Serie Manuel Du Propriétaire page 30

Chapter 1 Handling the Product
How to use (continued)
■ 7-Push Button Switch Set
7-Push Button Switch Set is equipped with a lock type emergency stop button (VFD reset button) and lift/lower push
buttons. One-step push button switch or two-step push button switch is mounted as Lift/lower push button switches in
accordance with the specification of single speed or dual speed VFD specification. Refer to the operation method of the
corresponding specification.
Moving directions of the trolley are expressed as East/West for traveling motion, and North/South for traversal motion in
the operational instruction of the Push Button Switch Set.
1
No label for the
single speed
Dual
model
No label for the
single speed
Dual
model
30
Emergency Stop Button (VFD Reset Button)
●
1) Press the Emergency Stop Button
• The button is locked at the pressed end.
2) Turn the Emergency Stop Button
• Press-locked button returns to the original position.
* When the electric chain hoist is not used, press the Emergency Stop Button
Operation Button
●
● Lift/Lower Button
Single Speed Model
1) Press button to lift the load.
• The electric chain hoist stops
when the button is released.
1) Press button to lower the
load.
• The electric chain hoist stops
when the button is released.
● Travel Button
Single Speed Model
1) Press button to move the
trolley to the east.
• The trolley stops when the button
is released.
1) Press button to move the
trolley to the west.
• The trolley stops when the button
is released.
● Traverse Button
Single Speed Model
1) Press button to move the
trolley to the south.
• The trolley stops when the button
is released.
1) Press button to move the
trolley to the north.
• The trolley stops when the button
is released.
deeply when carrying out an emergency stop or VFD reset.
clockwise to cancel the lock.
Dual Speed VFD Model
1) Press button to lift the load.
2) When lifting the load at high speed, press the
button further to the end.
• The electric chain hoist stops when the button is released.
1) Press button to lower the load.
2) When lowering the load at high speed, press the
button further to the end.
• The electric chain hoist stops when the button is released.
Dual Speed VFD Model
1) Press button to move the trolley to the east at
low speed.
2) Press button further to the end to move the
trolley to the east at high speed.
• The trolley stops when the button is released.
1) Press button to move the trolley to the west at
low speed.
2) Press button further to the end to move the
trolley to the west at high speed.
• The trolley stops when the button is released.
Dual Speed VFD Model
1) Press button to move the trolley to the south at
low speed.
2) Press button further to the end to move the
trolley to the south at high speed.
• The trolley stops when the button is released.
1) Press button to move the trolley to the north at
low speed.
2) Press button further to the end to move the
trolley to the north at high speed.
• The trolley stops when the button is released.
deeply to the end.