How To Use - KITO ER2 Serie Manuel Du Propriétaire

How to Use

ER2 Series Electric Chain Hoist has two models: single speed model and dual speed VFD model. Other than them, such
products are provided that can travel/traverse when combined with a trolley or a crane. Their push button switches for
operation differ in the size and the operating method. Check the product model of the hoist and use it properly.
• Do not use the Hook without a Hook Latch or damaged Hook.
• Do not use the Load Chain with heavy elongation, abrasion or deformation.
• Do not cut, extend, or weld the Load Chain.
Prohibited
• Do not use the Load Chain with the Bottom Hook without smooth motion.
• Do not use the Load Chain when its brake does not function securely even without load, or when the stopping
distance is too long.
• Do not use the product if it moves oppositely to the direction indicated on the push button switch.
Failure to comply with these instructions may result in death or serious injury.
• Carry out daily inspection before operation.
(When any abnormality was found during inspection, turn off the power, indicate "FAILURE" and ask the maintenance engineer
for repair.)
Mandatory
• Check the slinging devices for no abnormality.
Failure to comply with these instructions may result in death or serious injury.
• Do not use the product with an illegible nameplate or warning label affixed to the body size.
Failure to this instruction may result in the injury or the property damage.
Prohibited
• When using the product for the first time, affix the labels indicating East, West, North and South on the push button
switches.
• Check the contents of the work and make sure that the electric chain hoist has proper performance for the load and
Mandatory
lift.
• Check the contents of the work and operate the electric chain hoist at a place enabling to look out the operating area
without hindrance.
• When looking out the operating area is difficult, arrange the monitor near the place for safety.
• Operate the electric chain hoist at a place with firm foothold without danger of falling, stumbling, slipping or over
turning.
• Before moving the load, warn all the surrounding people.
• Even if the crane or the electric chain hoist is permanently installed and used for the same purpose repeatedly, check
the contents of the work and make sure that the work does not exceed the capacity on each occasion.
• Appoint the maintenance engineer or competent personnel among the qualified personnel for operation of cranes
and electric chain hoists. Indicate the name of the personnel on a place with legibility.
• The maintenance engineers shall check the result of daily inspection.
• When informed of abnormality of the electric chain hoist, the maintenance engineers shall take immediately any
necessary measures such as prohibition of use and repair.
• When carrying out inspection and repair, secure the environment for safe work without electric shock and falling.
Failure to comply with these instructions may result in bodily injury or property damage.
DANGER
CAUTION
1 1
(to be continued)
19