KITO ER2 Serie Manuel Du Propriétaire page 55

■Motorized Trolley Type
■125 kg~5 t
Connecting the relay cable
●
1) Insert the connector plug (4P) of relay
cable for power supply in the connector
socket (4P) of ER2. Tighten the Lock
Ring securely.
2) Insert the connector plug (8P) of relay
cable for operation in the connector
socket (8P) of ER2. Tighten the Lock
Ring securely.
Connection Box
Relay cable for
operation
Connector socket (8P)
Relay cable
for power
Connector
socket (4P)
Connector
plug (4P)
Lock Ring
Connector
Electric chain hoist
plug (8P)
Connector
socket (8P)
● Connecting the Push Button Switch Cord
1) Insert the connector plug (8P) of Push Button Switch
Cord in the connector socket (8P). Tighten the Lock
Ring securely.
2) Pass the Chain retainer into the hoop at the end of
the Protection Wire and fix it to the bar holder with a
pan head screw.
Connecting the Power Cable
●
1) Remove the Holder A mounted to the
Connection Box.
2) Pass the Power Cable through the Holder A
supported by the cable holder and the cable
packing.
3) Insert the Power Cable to the Holder B of the
Connection Box and tighten the Holder A
securely.
● Trolley Type
1) Mount the cable holder, which the Power Cable
is passed, to the cable holder arm using a chain
hanging pin B, a slotted nut and a split pin.
4) Connect the Power Cable to the terminal
panel of the Connection Box.
Connector plug (8P)
• Connect wires correctly according to the wiring
Cable packing
diagram affixed on the Connection Box.
Power Cable
(to Power or Crain Control Box)
Holder B
Holder A
Pan head screw
<Trolley Power Cable Connection>
Chain retainer
Protection wire
Cable holder arm
Chain hanging pin B
Power Cable
Cable holder
Chain retainer
Pan head screw
Split pin
Slotted nut
(to be continued)
1 1
55