KITO ER2 Serie Manuel Du Propriétaire page 5

• Do not drag or drop the product when carrying.
Otherwise it causes damage or flaw of the electric chain hoist, bodily injury or loss of property due to the drop of the lifted
load.
Prohibited
• When discarding the product, disassemble it not to be used and discard in accordance with the ordinances of
local government or the rules specified by the business entity.
Ask the local government or the relevant section for the details.
Mandatory
Refer to "Disassembly/Assembly Manual" for disassembling, or contact KITO.
(This product uses oil. We prepare SDS (Safety Data Sheet) for the oil. Contact KITO for it.)
• Carry out daily inspection by user.
• Carry out inspection (monthly, annual) by maintenance engineer.
• Keep the record of the inspection.
Failure to comply with these instructions causes bodily injury or loss of property.
■ General Matters on Handling of Dual Speed VFD Model
The dual speed VFD model electric chain hoist is controlled by VFD for important items related to safety such as
operation, braking and emergency stop. Be sure to follow the safety precautions below as well as the above safety
precautions.
• Do not change parameters.
When parameters need to be changed, ask distributor or KITO.
• Do not carry out the work such as maintenance and inspection within 5 minutes after power off.
Prohibited
Wait for the completion of discharging of the capacitor inside the VFD.
• Do not touch the controller cover as it becomes hot during operation.
Do not touch the controller cover until about 30 minutes elapsed after the stop of operation.
• USE KITO genuine VFD.
The VFD requires the special specification for KITO. Be sure to use genuine VFD.
• Do not change the connection of the VFD.
When the wires were removed for any reason, connect them again correctly checking the wiring diagram inside the
controller cover.
• Do not carry out withstand voltage test and insulation resistance measurement of a circuit by megger while the
VFD is connected.
• Do not turn off the power while operating.
Failure to comply with these instructions may result in death or serious injury and the damage of VFD.
CAUTION
DANGER
5