Entering Or Determining The K Factor Of The Fitting Used - Burkert 8025 Manuel D'utilisation

Type 8025/8035 battery powered
Operatingandcommissioning
8.6.3.

entering or determining the K factor of the fitting used

The device determines the flow rate in the pipe using the fitting K factor.
The K factor of the fitting used can either be entered (see Fig. 18) or determined using a teach-in procedure (See Fig. 19).
ENTER
K-FACtOR tEACh NO
FiltER
Fig. 18: Entering the K factor of the fitting used
The display shows the last K factor of the fitting, may it have been
ENTER
K=000.0
entered or determined by a teach-in procedure.
→
Edit the parameter.
0......9
→
Enter the K factor (value between 0,0001 and 9999,9) of the
ENTER
K=48.30 fitting used.
→
Confirm the displayed value.
English
21