7.3.2 Multiplier of the calibration
The display only displays values in the range from 0 to 199,99. With the multiplier
(upper row of bars), the setting can be divided by 10, 100 or 1000.
Figure 8: Multiplier of the Calibration
7.3.3 Calibration of the transmitter input
Here, the calibration for the 4-20 mA transmitter input will be set up.
NOTE
The standard signal (4 - 20 mA) corresponds to the range set up, i.e., 4 mA
corresponds to the lower, and 20 mA to the upper limit value.
Example:
Operating Manual No. 800 215
Multiplier = 1
Multiplier = 0,1
Multiplier = 0,01
Multiplier = 0,001
Change the multiplier
Proceed to 7.3.3
Enter the calibration with the unit.
Lower limit value
Upper limit value
0 bar
10 bar
4 mA
20 mA
35