Available Versions; Technical Data; Conditions Of Use; Conformity To Standards And Directives - Burkert 8025 Manuel D'utilisation

Type 8025/8035 battery powered
Technicaldata
1 2 3
TOTAL :SE35/8035 COIL 9V
IP65
S/N 1439
00423921
W43MA
8 7 6 5 4
Fig. 2: Name plate of the
8035
5.4.

Available versions

• The flowmeter-totalizer type 8035 is made up of an SE35 elec-
tronic module with order code 423921 and of an S030 fitting-
sensor which has to be ordered separately.
• The flowmeter-totalizer type 8025 exists in 2 versions:
type of flow sensor seal material
short, with coil FKM
long, with coil FKM
1.
Type of the device
2.
Specification of the flow sensor
3.
Power supply
4.
Manufacturing code
5.
Conformity logo
6.
Protection rating
7.
Serial number
8.
Order code
order code
418403
418405
6.

TechnicAl DATA

6.1.

conditions of use

Ambient temperature 0 to +60 °C
Air humidity < 80%, without condensation
Height above see max. 2000 m
level
Protection rating IP65, cover lid screwed tight and screwed
plugs.
6.2. conformity to standards and
directives
The device conforms to the EC directives through the following
standards:
• EMC: EN 61000-6-2, EN 61000-6-3
• LVD: EN 61 010-1
• Vibration: EN 60068-2-6
• Shock: EN 60068-2-27
• Pressure: article 3§3 of the Pressure Directive 97/23/CE. Acc. to
the Pressure Directive 97/23/CE: the device can only be used in
the following cases (depending on the max. pressure, the DN of
the pipe and the fluid)
English
7