Choosing The Display Language; Choosing The Flow Rate Units, The Number Of Decimals And The Units Of The Totalizers - Burkert 8025 Manuel D'utilisation

Type 8025/8035 battery powered
Operatingandcommissioning
8.6.1.

choosing the display language

When the device is energized for the first time, the display language
is English.
lANGUAGE ENGlish
DEUtsCh
FRANçAis
itAliANO
UNit
Fig. 16: Diagram of the "LANGUAGE" parameter of the
Configuration level
→
Confirm the dis-
played language:
The selected lan-
guage is immediately
active.
8.6.2. choosing the flow rate units, the
number of decimals and the units of
the totalizers
The max. flow rate that can be displayed depends on the
number of decimals chosen:
• 9999 if the number of decimals = 0,
• 999,9 if the number of decimals = 1,
• 99,99 if the number of decimals = 2,
• 9,999 if the number of decimals = 3.
The maximal volume that can be displayed by the totalizers
depends on the unit of the chosen volume:
• 9 999 999 if the chosen volume unit is "litre",
• 999 999 if the chosen volume unit is "m
The "UNIT" parameter makes it possible to choose:
• the flow rate units.
• a fixed number of decimals (choose 0, 1, 2 or 3) to display the
flow rate in the Process level.
• the volume units of the totalizers if the unit previously chosen is in
litres or in m .
3
English
3 ", or "gallon".
19