General Information; Manufacturer's Address And International Contacts; Warranty Conditions; Information On The Internet - Burkert 8025 Manuel D'utilisation

4.

GenerAl informATion

4.1. manufacturer's address and
international contacts
To contact the manufacturer of the device, use following address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
You may also contact your local Bürkert sales office.
The addresses of our international sales offices are available on the
internet at: www.burkert.com
4.2.

Warranty conditions

The condition governing the legal warranty is the conforming use
of the 8025 or the 8035 in observance of the operating conditions
specified in this manual.
4.3.

information on the internet

You can find the user manuals and technical data sheets regarding
the type 8035 or 8025 at: www.burkert.com
6
English
Type 8025/8035 battery powered
Generalinformation
5.

DescripTion

5.1.

Area of application

The battery powered flowmeter-totalizer 8025 or 8035 is intended
to measure the flow rate and totalize the volume of liquid.
5.2.

General description

The device type 8025 is made up of a flow sensor with paddle
wheel and an electronic module with display.
The device type 8035 is made up of an SE35 electronic module
and of an S030 fitting-sensor incorporating the paddle wheel which
measure the flow.
The device is fed with 2 batteries.
5.3.

Description of the name plates

1 2 3
TOTAL :8025- SUPPLY: BATT9V
COIL SHORT - OUT: /
S/N 1439
00418403
W43MA
8 7 6 5 4
Fig. 1: Name plate of the
8025
1.
Type of the device
2.
Power supply
3.
Type of output: without
4.
Manufacturing code
5.
Conformity logo
6.
Specification of the flow sensor
7.
Serial number
8.
Order code