Description Of The Name Plate Of The 8011; Description Of The Name Plate Of The Se11 - Burkert 8011 Manuel D'utilisation

Generalinformation
To obtain a flow rate Q, this frequency must be divided by a propor-
tionality factor K according to the following formula:
Depending on the version, the electrical connection is made using a
1 m long cable or a multi-pin M12 fixed connector which position can
be adjusted.
Depending on the version, the device is equipped:
• with one NPN pulse output
• with two pulse outputs, NPN and PNP.
5.3. Description of the name plate of
the 8011
1 2
FLOW:8011 HALL
NPN/PNP: 0,7A - 36VDC
6-36VDC
PV FKM
00556249
11 10
1.
Supply voltage
2.
Measured value and type of the device
3.
Type of sensor
4.
Pulse output data
5.
Type of connection
6.
Flow range
Type 8011
Q = f/K
3
4
5
D63
6
0,3-10 M/S
W46MN
9 8 7
7.
Conformity logo
8.
Manufacturing code
9.
Material of the seal exposed to the fluid
10.
O rder code
11.
F itting material
5.4. Description of the name plate of
the se11
1 2
FLOW:SE11 HALL
NPN/PNP: 0,7A - 36VDC
6-36VDC
00559453
8
1.
Supply voltage
2.
Measured value and type of the device
3.
Type of sensor
4.
Pulse output data
5.
Flow range
6.
Conformity logo
7.
Manufacturing code
8.
Order code
English
3
4
0,3-10 M/S 5
W46MN
7 6
9