Burkert 8025 Manuel D'utilisation page 13

Type 8025/8035 battery powered
application range
P fluid (bar)
11
10
9 PVDF
8
PVC + PP
7
6
5
PVC (PN10)
4
3
2
1
0
-15 0 +20
Fig. 5: Type 8025, temperature-pressure dependency curves,
depending on the S020 fitting material
application range
P fluid (bar)
16
15
14
13
12
11
10
9
PVDF
8
PVC + PP
7
6
5
4 PVC (PN10)
3
2
1
0
-30 -10 +10 +30 +50 +70 +90 +110
Fig. 6: Type 8035, temperature-pressure dependency curves,
depending on the S030 sensor-fitting material
Installation
Metal
PVDF (PN10)
PP (PN10)
+40 +60 +80
T fluid (°C)
A
Metal
PVDF (PN10)
PP (PN10)
T fluid (°C)
7. insTAllATion
7.1. safety instructions
danger
risk of injury due to high pressure in the installation.
• Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
risk of injury due to electrical voltage.
• Shut down and isolate the electrical power source before car-
rying out work on the system.
• Put the power switch to OFF before carrying out work on the
device.
• Observe all applicable accident protection and safety regulati-
ons for electrical equipment.
risk of injury due to high fluid temperatures.
• Use safety gloves to handle the device.
• Stop the circulation of fluid and drain the pipe before loosening
the process connections.
risk of injury due to the nature of the fluid.
• Respect the prevailing regulations on accident prevention and
safety relating to the use of aggressive fluids.
English
11