Burkert 8025 Manuel D'utilisation page 24

The teach-in procedure is done depending on a known volume.
→
Prepare a tank with a known volume.
→
Stop the fluid circulation.
→
confirm "TEACH Y.": "FILL END." is displayed.
K-FACtOR
FiltER
Fig. 19: Teach-in procedure depending on a volume
22
ENTER
tEACh NO
tEACh Y
The device calculates
the K factor of the
fitting and displays it.
ENTER
K=48.30
English
ENTER
Fill END
→
Charge the pipe to fill the tank.
ENTER
→
When the tank is full, confirm "FILL END":
0000.0 l
0......9
→
Enter the volume (value > 0,0 and ≤ 9999,9)
ENTER
0100.0 l
of fluid that passed in the circuit.Confirm.
Type 8025/8035 battery powered
Operatingandcommissioning
Do not enter a volume value of 0,0
because the calculated K-factor would
be of 0,0 and the device would not be
operating.