Creo Medical 7-EMR-050 Instructions D'utilisation page 20

Normal Use
Cooling States
TYPE 3 Instruments Only
The following screen will appear once the ablation countdown timer has reached 00:00.
The 'cooling down' period is instrument specific.
Energy Delivery Complete
Please Wait
Cooling Down
00:30
There are two options for exiting the cooling state. There is a manual exit and an automatic
exit.
Cooling State – Manual Exit
To manually exit this state a press of the menu button (5) will access a confirmation screen as
shown below:
Please Wait - Cooling Down
Confirm Exit
=== ===
YES
Confirming 'YES' will transition to the following screen in order to setup the generator for
another treatment.
Set Ablation Time
+ 00:00 - 00:00
Page 20 of 248