How To Use The Cable Clips (All Versions) - Burkert 8025 Notice D'utilisation

3 INSTALLATION
+
-
Power
supply
(*)
Metallic devices
(valve, pump, etc)
(*) If direct earthing is impossible, connect a 100 nF/50 V
condensator between the negative terminal and the
earth.

3.3.2 How to use the cable clips (all versions)

Before wiring the device, insert the supplied cable clips into the cuts of the electronic
board and, if fitted, into the cut of the 115/230 VAC power supply board.
Fig. 3.5 Using the cable clips
BATCH CONTROLLER 8025
8025
Panel or wall-
mounted version
Plastic pipes
E-14-
8020