Burkert 8025 Notice D'utilisation page 58

2 DESCRIPTION
Medium
Pressure class
Max. medium temperature
Max. viscosity
Max. solid particle rate
Electrical features
Power supply
Current consumption
IN1 to IN4 inputs (volume selection)
OUT output, indication of the
batch status
Relay outputs
Wiring
Sensor input (separated versions)
Sensor output (separated versions)
Materials
Finger armature (compact)
Paddle-wheel axis and
bearings (compact)
Paddle-wheel
Gaskets (compact)
Nut (compact)
Housing
Cover with lid (compact)
Cover (panel-mounted)
Front foil
Screws
Cable glands
BATCH CONTROLLER 8025
PN 10 (compact version), see also temperature/
pressure diagram, § 3.1
PVC: 50°C
PP, PVDF, stainless steel, brass: 80°C
300 cSt.
1%
12-30 VDC, filtered and regulated,
or 115/230 VAC, depending on version
≤ 70 mA, without consumption of inputs/output
4 binary inputs, 5-30 VDC, 3,3 kΩ impedance
Transistor NPN, open collector,
0 - 30 VDC, 100 mA, protected,
4 possible statuses (see § 4.1.4)
2 relays, 3 A, 230 VAC, adjustable
Through shielded cable, 1,5 mm
section, 50 m max. length
Frequency: 2,5 to 700 Hz
NPN collecteur ouvert, bobine, TTL ou CMOS
Output voltage (depends on postion of switch
SENSOR SUPPLY):
12-30 VDC or 0-18 VDC, wenn the controller is
supplied with 12-30 VDC
27 VDC or 15 VDC, wenn the controller is
supplied with 115/230 VAC
Consumption (max. current delivered by the
controller):
100 mA (12-30 VDC versions)
25 mA (115-230 VAC version)
PVDF
Ceramics
PVDF
FPM (EPDM supplied with delivery)
PC
PC (compact and panel-mounted)
ABS (wall-mounted)
PC
PC
Polyester
Stainless steel
PA
E-8-
2
max. cross