Changing The Cable Outlet Direction - Burkert 8625-2 Manuel D'utilisation

All manuals and user guides at all-guides.com
5.2

Changing the cable outlet direction

Unscrew the 4 screws on the front panel
of the temperature controller and remove
the cover carefully.
Remove the screw to the valve and
remove the plastic cross.
Detach the plate from the cube.
Pull out the cube downwards and replace
in the desired orientation.
Place the plate onto the cube (the pins
must engage in the guides).
Lay on the plastic cross and insert the
screw through the cube.
Connect the temperature controller to the
proportional valve (see 5.1).
8625-2 Standard - 9