Installation; Installation Guidelines - Burkert 8025 Notice D'utilisation

2 SPECIFICATION

3.1 Installation Guidelines

The batch controller 8025 compact can only be used to measure pure,
liquid and water ressembling fluids (solids content ≤ 1%, viscosity max.
300 cSt with on-line calibration).
The device is not suited for dosing gases.
Pressure-Temperature-Diagram
Mind pressure-temperature dependence according to the respective fitting materials.
P (bar)
10
9
8
7
6
5
4
3
2
1
0
-50
Installation Guidelines
Determine the appropriate pipe diameter using the flow diagrams in annex.
For installing the fitting onto the pipe, respect the recommendations described in the
corresponding instruction manual.
The device must be protected from the rain, constant heat radiation and
other environmental influences such as magnetic fields or direct
exposure to sunlight.
PVC + PP
PVDF
PVC (PN 10)
-30
-10 +10
BATCH CONTROLLER 8025
Operating range
PVDF (PN 10)
PP (PN 10)
+30
+50 +70
E-9-
Metall / Metal / Métal
+90
T (°C)