Totalizer; Test Menu; Ext.act - Burkert 8025 Notice D'utilisation

4 CONFIGURATION

4.4.8 Totalizer

Simultaneous setting of both counters to zero. This facility becomes operational when the
user presses the Enter key while in the «END» option in the Calibration menu.
TOTAL
ENTER
END
ENTER

4.5 Test Menu:

The following adjustments and checks are carried out in the Test Menu:

EXT.ACT.

RELAY 1
RELAY 2
FREQUENC
4.5.1 EXT.ACT.
This sub-menu provides for checking the allocation of binary logic levels to the binary data
inputs under the «EXT.MEM» dosage option and also provides a readout of the pulse
duration under option «EXT [T]».
«EXT.MEM» Option
EXT.ACT.
ENTER
RELAY 1 ENTER
RES N°
RES YES
ENTER
0......9
Verification of the binary data inputs in mode «EXT.MEM».
Readout of Pulse duration in «EXT.[T] mode.
Check on relay 1 operation.
Check on relay 2 operation.
Transducer frequency readout
END
Return to the Main Menu and the setting of new parameters.
V 1
Readout of quantities corresponding to the coding of the binary inputs
(by using the rotary knob, for example). If the readout shows «--» the
coding of the inputs corresponds to a zero quantity.
BATCH CONTROLLER 8025
simultaneously for 5 s.
V4
E-38-