4.
GENERAL INFORMATION
4.1.
Contact address
Germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: info@de.burkert.com
International
Further contact addresses can be found on the Internet at:
www.burkert.com
4.2.
Warranty
The warranty is only valid if the Control Head Type 8681 is used as
intended in accordance with the specified application conditions.
4.3.
Information on the Internet
Operating instructions and data sheets on Type 8681 can be found
on the Internet at:
www.burkert.com
> Documentation > Manuals / Approvals > Search by Type
8
All manuals and user guides at all-guides.com
english
Type 8681
GeneralInformation
5.
STRUCTURE AND FUNCTION
The Control Head Type 8681 has been designed for use as actuation
of pneumatically operated process valves and/ or for recording the
switching states of these.
For the recording and feedback of the process valve switching posi-
tions to a higher-level control, the control head has been equipped
with a contactless position measuring system, which works with three
discrete, adjustable feedback signals (Teach-In Function).
Various pneumatic and electrical connection variants are available.
Positions and status information can be indicated by means of three
signal colors.
5.1.
Manual Control
Standardly, the control head provides the following:
• a magnetic manual control that is easily accessible from the outside
on the basis of encoded magnetic fields for Solenoid Valve 1 (Con-
nection 2/A1), as well as
• a mechanical manual control accessible when the hood is open on
each equipped solenoid valve.