General Safety Instructions; Symbols Used - Burkert 1094 Instructions De Service

All manuals and user guides at all-guides.com
1

GENERAL SAFETY INSTRUCTIONS

To ensure that the devices function correctly, and that they have a long service life,
please comply with the information in these Operating Instructions, as well as the
Application Conditions and the permissible values that are specified in the data
sheets for the proportional valve used, and for the type 1094 electronic system:
•
when planning the application of the device, and during its operation, observe the
general technical rules;
•
observe the relevant accident prevention and safety regulations applicable for electrical
equipment throughout the operation, maintenance and repair of the device;
•
note that lines and valves must not be disconnected from systems that are under
pressure;
•
always switch off the voltage supply before working on the system;
•
take suitable measures to prevent unintentional operation or impermissible impairment;
•
if these instructions are ignored, no liability will be accepted from our side, and the
guarantee on the device and on accessories will become invalid.
NOTE
2

SYMBOLS USED

In these Operating Instructions, the following symbols are used:
indicates a working step that you will have to carry out
ATTENTION!
NOTE
14
Approvals such as Ex, UL, UR, CSA, DVGW etc., will be indicated
on the rating plate, or by a special label.
indicates information which must be followed. Failure to do this
could endanger your health or the functionality of the device
indicates important additional information, tips and
recommendations
Type 1094