General Notes; Intended Use - Burkert 6106 Instructions De Service

GENERAL NOTES

The EC Design Type Inspection Certificate PTB 01 ATEX 2175
was issued and the production audited (CE0102) by the
Physikalisch Technischen Bundesanstalt
Bundesallee 100
38116 Braunschweig
NOTE For EC Design Test Certificate PTB 01 ATEX 2175,
see annex. For temperature classes and electrical data see
"Technical Data".

Intended use

Please observe the notes in these operating instructions as well as the
conditions of use and permitted data specified on the data sheet of the device in
use, in order that the device will function perfectly and have a long service life.
• On non-observance of these notes and unauthorized interference with the
device, we will refuse all liability and the guarantee on device and
accessories will become void!
• The device serves exclusively as a solenoid valve for the media stated in
the data sheet and for use in Explosion Group II, Category 2 G and
Temperature Class T5 or T6 (see data on the
• The type of protection used is inherent safety EEx i for coils with circular
connectors, rectangular connectors with and without protective collars, as
well as connection via single impressed wires and apparatus socket
connection upwards to DIN 43650 Form C.
• The device may be employed in potentially explosive atmospheres only in
the manner approved by the Physikalisch Technische Bundesanstalt, i.e. the
values stated in the approval or the electrical connection shall be complied
with.
Any other use or use exceeding the specific scope is considered to be non-
•
intended use. Bürkert will not be liable for any damage resulting therefrom.
The risk will be borne by the user.
approval plate).
01 ATEX 2175 - 3