Mercedes-Benz LINGUATRONIC Notice D'utilisation Complémentaire page 25

Controls
24
"Save station"
Using the command "Save station", you can
assign a voice tag to the station currently
selected.
Use this command:
to improve voice recognition of difficult
R
names
if you want to use a name of your own
R
You could, for example, save a station with
the name "Favorite station".
When you have said the command, the Voice
Control System prompts you up to three
times to say the station name. When
repeating the station name, make sure that
you pronounce it in exactly the same way as
you did the first time. Otherwise, the name
cannot be saved and the Voice Control
System cancels the saving procedure.
Example of dialog:
\ Store station
^ Please say the station name.
\ Favorite station
^ Please repeat the station name.
\ Favorite station
^ "Favorite station" has been saved.
"Select station"
Using the command "Select station", you can
select a receivable or stored station.
Example of dialog:
\ Select station
^ Please say the station name.
\ Favorite station
_ The Voice Control System sets the
station.
"Favorite station"
Using this command, you can select a stored
station.
5 Example of a station name.
5
5
5
Example of dialog:
\ Favorite station
5
_ The Voice Control System sets the
station.
"Select a channel number" (satellite
radio)
Use the command "Select a channel number"
to enter a channel number.
"Select a category" (satellite radio)
You can use this command to select an
available category.
Example of dialog:
\ Select category
^ Please say the name of the category.
\ Messages
_ The Voice Control System sets the
category.
"Next category"/"Previous category"
(satellite radio)
You can use the following commands to
change the category:
"Next category"
R
"Previous category"
R
"Read out category list" (satellite radio)
Use the command "Read out category list" to
hear the names of all satellite radio
categories. If desired, you can select one
from the category list.
Example of dialog:
\ Read out category list
The system reads out the category list.
If the category you desire is read out:
Press the ? button.
X
The system sets the corresponding
category.