Mercedes-Benz LINGUATRONIC Notice D'utilisation Complémentaire page 13

Controls
12
"Confirm"
While you are entering a number, you can use
the command "Confirm" to have all the
spoken digits repeated by the Voice Control
System. The Voice Control System will then
prompt you to continue with the entry.
Example of dialog:
\ Dial number
^ Please say the number.
\ Zero one three zero
^ Zero one three zero
\ Confirm
^ Zero one three zero. Please continue.
\ Five zero zero five
^ Five zero zero five
\ OK
^ Dialing number.
"Correction"
While you are entering a number, you can use
the command "Correction" to correct the
block of digits last spoken. When you say this
command, the Voice Control System deletes
the last block of digits and repeats the digits
entered up to this point. The Voice Control
System will then prompt you to continue with
the entry.
Example of dialog:
\ Dial number
^ Please say the number.
\ Zero one three zero
^ Zero one three zero
\ Five zero zero five
^ Five zero nine five
\ Correction
^ Zero one three zero. Please continue.
\ Five zero zero five
^ Five zero zero five
\ OK
^ Dialing number.
"Delete"
While you are entering a number, you can use
the command "Delete" to delete all the digits
which have been entered. After you have said
this command, the Voice Control System
prompts you to enter additional digits or
commands.
Example of dialog:
\ Dial number
^ Please say the number.
\ Zero one three zero
^ Zero one three zero
\ Five zero zero five
^ Five zero zero five
\ deleting
^ Number deleted, please continue
\ Zero three seven three
^ Zero three seven three
\ Three nine one
^ Three nine one
\ OK
^ Dialing number.
"Save name" (address book)
Use the command "Save name" to save a
telephone number with a speaker-dependent
voice tag. Use this command if you have a
name that is complicated or written
differently from the way in which it is spoken.
When you have said the voice command, the
Voice Control System prompts you to enter a
phone number.
The digits 0 – 9 and the word "Plus" are
permissible.
"Plus" replaces the international dialing code,
e.g. "00".
Say the telephone number in the form of a
continuous string of digits or as blocks of
digits, e.g. three to five digits.
The Voice Control System repeats the digits
it recognizes after each block of digits (with a
pause of about half a second between each
block of digits). It then waits for you to
continue speaking.