Mercedes-Benz LINGUATRONIC Notice D'utilisation Complémentaire page 10

The Voice Control System confirms when you
enter important commands and informs you
when you make an incorrect entry.
Command types
A distinction is drawn between the following
types of command in the Voice Control
System:
Global commands:
R
These are commands which can be called
up at any time (such as help or phone
commands).
Local commands:
R
These are commands that are only
available for the active application (such as
the "Station selection" radio function).
Active application
The local commands refer to the application
currently shown on the display and to the
audio source you are currently listening to.
If, for example, you are listening to the radio
while the navigation application is active on
the display, you can operate both
applications using voice control.
If you would like to operate another function
using voice control, you must first switch to
the application in question with the
appropriate command.
Operation using the multifunction
steering wheel
The Voice Control System is operational
approximately thirty seconds after it is
switched on.
i
You can cancel the dialog with the Voice
Control System at any time.
Example: M-Class multifunction steering wheel
: %
Cancels the dialog with the
Voice Control System
; ?
Starts the dialog with the
Voice Control System
= 6
Accepts a call
~
Ends a call
X
Decreases the volume
W
Increases the volume
8
Mute
Starting the dialog
Switch on the ignition (see the vehicle
X
Operator's Manual).
Press the ? button on the multifunction
X
steering wheel.
An acoustic signal sounds. The dialog has
been started.
Say a command.
X
Interrupting/continuing the dialog
Interrupting a dialog
If a list appears on the display, you can use
the command "Pause" to interrupt the dialog.
Say the command "Pause".
X
You can then select an entry using the
COMAND controller.
At a glance
9
Z