Cleaning And Service - Masimo MightySat Manuel De L'utilisateur

Using the Touchpad
The Touchpad
Note: The display is not a touch screen.
ACTION DESCRIPTION
Tap and release. Action will
Touch be performed once finger is
released.
Press and hold. Release
Press and
finger once action has been
Hold
performed.
Touch and slide (left, and right)
Swipe
and release.
Navigating the Menu
From the Main Screen, press and hold the Touchpad to access the Main Menu.
Use the Touchpad Swipe gesture to scroll through the Main Menu Options. Use the Touch gesture to select the Main Menu
Option. Use the same gestures to adjust settings.
The Menu options are:
MAIN MENU DISPLAY
OPTIONS BUT TON
Back
Waveform
Brightness
About
Connecting to a Smart Device via Bluetooth (Optional)
Note: Bluetooth LE is an optional feature available on specific versions of MightySat Rx for use with compatible smart
devices. For a full list of compatible smart devices, see www.masimoprofessionalhealth.com.
1. From your compatible smart device, do one of the following:
• For Android™-powered devices, go to the Google Play™ store.
• For Apple® devices, go to the App Store
2. Search and download the "Masimo Professional Health" app.
3. Follow on-screen instructions in the Masimo Professional Health app to pair MightySat Rx with a compatible smart device.

CLEANING AND SERVICE

Cleaning MightySat Rx
Warning: Before cleaning, read Cleaning and Service Warnings and Cautions section in this manual.
Warning: Before cleaning, make sure the device is off and is not applied to a finger.
Note: Before cleaning, remove the batteries and make sure the battery cover is attached correctly.
To clean the MightySat Rx, follow the instructions below:
• The outer surfaces can be cleaned either with a soft cloth dampened with a mild detergent and warm water solution or
they can be wiped down with the following cleaning solutions:
• Cidex Plus (3.4% glutaraldehyde)
• 10% bleach solution
• 70% isopropyl alcohol solution
• Allow the MightySat Rx to dry thoroughly before using again.
Caution: To avoid permanent damage to the MightySat Rx, do not use undiluted bleach (5% - 5.25% sodium hypochlorite) or
any other cleaning solution not recommended.
on the MightySat device is located below the display screen.
Select a menu item or action.
Touch rotates the display clockwise :
Enter and Exit the Main Screen
Scroll through all selectable menu options.
DESCRIPTION
Return to Main screen
Allows the user to choose if the waveform will be
displayed on the screen.
Change the brightness of the display screen.
Hardware and software information about the
device including serial number, software version,
and Bluetooth LE Mac Address.
.
SM
FUNCTION
DEFAULT
N/A
On
100%
N/A
7
OPTIONS
N/A
On or Off
25%, 50%,
75% and
100%
N/A
8981C-eIFU-0620