Program For Splitting The Weight On Either Side Of The Spoke "Split Weight; (Only With Motorcycle Programmes); Unbalance Optimisation Programme "Opt - Corghi CompactLine EM 9250 Manuel D'utilisation

11. PROGRAM FOR SPLITTING THE WEIGHT ON
EITHER SIDE OF THE SPOKE "SPLIT WEIGHT"

(ONLY WITH MOTORCYCLE PROGRAMMES)

Some rims have spokes so wide that it is not possible to place adhesive weights next
to them; for this reason, the Split Weight programme devices the counterweights into
two parts.
To use this programme, proceed as follows:
- Turn the wheel until the central element of the external side position indicator lights
up.
It is recommended to keep the wheel in position using the pedal brake
- Press the key to activate the programme.
Programme activation is indicated by the illumination of the LED
panel.
- Use the
1 small
2 medium
3 large
OFF deactivates the programme;
- Confirm with the
- Apply two new counterweights in the positions indicated.
In the motorcycle balancing programmes, the weight division operation can be per-
formed on both balancing sides.
12. UNBALANCE OPTIMISATION PROGRAMME
This procedure minimises any vibration still present on the vehicle while running even
after accurate balancing, thus minimising the rim-tyre coupling run-out.
EM 9250 - EM 9250 C CompactLine Operator's manual
keys to select the spoke width
key.
"OPT"
on the display
UK
121