Set Up - Warning Opt; Set Up - Rim Diameter Display Unit Of Measurement - Corghi CompactLine EM 9250 Manuel D'utilisation

- press the

15.6. SET UP - WARNING OPT

The machine indicates the need to perform an unbalance optimisation procedure (OPT)
with the flashing LED on the display panel.
Proceed as follows to disable this function:
- press the
- use the
- press the
- use the keys to search for OPt on (OPt oFF if disabled)
- press the
OPt on to activate the display of the alarm indicator light
or OPt oFF to deactivate the display of the alarm indicator light
- press the
15.7. SET UP - RIM DIAMETER DISPLAY
UNIT OF MEASUREMENT
The machine may be set to display the rim diameter unit of measurement in inches or
millimetres.
Proceed as follows to modify this configuration:
- press the
- use the
- press the
130
key to confirm and exit.
key
keys to search for SEt UP
key to confirm
key to change the setting:
key to confirm and exit.
key
keys to search for SEt UP
key to confirm
EM 9250 - EM 9250 C CompactLine Operator's manual