Spoke "Split Weight" (Only With Motorcycle Programmes) - Corghi EM 9250 CompactLine Manuel D'utilisation

To select the exact position of the weight P2 relative to the Pe unbalance, use 6 o'clock
as the reference if the "LAS" configuration is active and 12 o'clock if the "H12" or "CLP"
configuration is active.
The angle between P1 and P2 must be less than 120° and must include the outer
weight Pe.
7 Press the
8 Turn the wheel manually and the two unbalance values calculated are displayed in
alternation on the display regarding the outer side as the angular position of the wheel
changes. Each of the two balancing weights is applied as described in the chapter
"Applying balancing weights in ALU1P or ALU2P balancing programmes".
The Hidden Weight function is combined with the SHIFT PLANES function to allow
the use of balancing weights in multiples of 5 grams
Notes:
- The Hidden Weight procedure can be quit at any time by simply pressing the
.
key
- The Hidden Weight procedure is automatically deactivated by performing a wheel
spin.
11. PROGRAM FOR SPLITTING THE
WEIGHT ON EITHER SIDE OF THE
SPOKE "SPLIT WEIGHT" (ONLY WITH
MOTORCYCLE PROGRAMMES)
Some rims have spokes so wide that it is not possible to place adhesive weights next
to them; for this reason, the Split Weight programme devices the counterweights into
two parts.
To use this programme, proceed as follows:
- Turn the wheel until the central element of the external side position indicator lights
up.
It is recommended to keep the wheel in position using the pedal brake
- Press the
98
key to memorise the second spoke.
key to activate the programme.
EM 9250 CompactLine Operator's manual