Stryker 6254 Mode D'emploi page 27

INSTALLING THE OPTIONAL WALL STORAGE BRACKET
To install the optional wall storage bracket:
1 . Use the bracket as a template to mark the location of the mounting holes at the area where the wall brackets will
be installed . Consider the dimensions of the chair when selecting and marking the location . The approximate
height of the bracket from the floor should be 60 inches .
2 . Using fasteners (not supplied) appropriate for the wall type, install the bracket by using at least four of the
mounting holes .
3 . Hang the chair from the bracket using the upper control handle .
www.stryker.com
Operation Guide
Figure 35 - Storage Bracket Dimensions
Figure 36 - Chair stored on the bracket
6254-009-005 REV B
Return To Table of Contents
1-25
English