Stryker 6254 Mode D'emploi page 17

USING RESTRAINT STRAPS - CONTINUED
To attach the chest straps:
1 . Wrap each strap around the chair frame, insert the end through
the loop on the end of the strap and pull it tight .
2 . Pull the strap across the passenger's chest, lengthening the
strap as necessary .
3 . Buckle the strap .
4 . Pull the loose end of the strap to tighten it securely around
the passenger .
5 . Repeat for the second strap and the lap belt .
Figure 4 - Insert the end through the loop
Figure 5 - Pull the strap tight
www.stryker.com
Operation Guide
Figure 6 - Lengthen strap as necessary
6254-009-005 REV B
Figure 7 - Buckle strap
Figure 8 - Tighten strap securely
Return To Table of Contents
English
1-15