Environmental Protection - Evolution RAGE 6 Manuel D'instructions

www.evolutionpowertools.com
MAINTENANCE
PLUG REPLACEMENT
The fuse in the main plug of your power tool should always be
replaced with one of identical rating.
Check the voltage given on your power tool matches the supply
voltage.
The power tool is supplied with a fitted plug, however if you
should need to fit a new plug follows the instruction below.
IMPORTANT
The wire in the mains lead are coloured in accordance with the
following code:
Blue - Neutral
Brown - Live
Green/Yellow - Earth
The wire that is coloured blue must be connected to the terminal
that is marked with the letter N. The wire that is coloured brown
must be connected to the terminal that is marked with the letter
L. The wire that is coloured green/yellow must be connected to
the terminal that is marked with the letter E.
A 13AMP (BS1363 or BS1363/A) plug must be used and a 5 AMP
fuse must be fitted.

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your Local Authority or retailer for recycling advice.
27
EN
FR
IT
NL