Items Supplied - Evolution RAGE 6 Manuel D'instructions

www.evolutionpowertools.com
CARRYING YOUR MITRE SAW
Safety Advice
1) Although compact, this saw is heavy.
To reduce the risk of back injury, get
competent help whenever you have to lift the
saw.
2) To reduce the risk of back injury, hold
the tool close to your body when lifting.
Bending your knees so you can lift with your
legs, not your back. Lift by using the handhold
areas at each side of the bottom of the base.
3) Never carry the table mitre saw by
the power cord or the trigger grip of the
handle. Carrying the tool by the power cord
could cause damage to the insulation or the
wire connections resulting in electric shock
or fire.
4) Before moving the saw tighten the mitre
and bevel lock knobs to guard against
sudden movement.
5) Lock the cutting head in its lowest
position. Ensure that the cutting head locking
pin is completely engaged in its socket.
WARNING:
Do not use the blade guard
as a 'lifting point' . The power cord must be
removed from the power supply before
attempting to move the machine.
•
Lock down the head using the head locking
pin.
•
Loosen the mitre angle lock knob. Push
down the mitre angle lever and rotate the
table to either of its maximum settings.
•
Lock the table in position using the locking
knob.
•
Use the two carry handle cut-outs
machined into either end of the machine
base, to transport the machine.
Place the saw on a secure stationary work
surface and check the saw over carefully.
Check particularly the operation of all
the machines safety features before
commissioning or operating the machine.

ITEMS SUPPLIED

Description
Instruction Manual
Hold Down Clamp
Push Stick
Allen Key (Arbor Lock)
Allen Key (Blade
Change)
Multi-Purpose Blade
(Fitted)
Rip Fence (Fitted)
Auxiliary Lower
Blade Guard
Additional Accessories
In addition to the standard accessories
supplied with this machine, other accessories
are available to improve its performance, these
include the following items:
1) Dust bag – the design of this machine
allows for a dust bag or workshop vacuum
extraction device to be fitted to the rear of the
machine.
2) Specialist cutting blades – use only
Evolution Blades with this machine.
Additional accessories can be obtained by
contacting your local dealer (or Evolution
Power Tools).
11
Quantity
1
1
1
1
1
1
1
1
EN
FR
IT
NL