Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
MAINTENANCE
Note
Any maintenance must be carried out with
the machine switched off and disconnected
from the mains power supply.
All motor bearings in this machine are
lubricated for life.
No further lubrication is required.
Apply light machine oil to the machines pivot
points and lower blade operating arm. Avoid
excessive oil, to which sawdust will cling.
Periodically, sawdust may accumulate under
the work table and the base. Use a vacuum
cleaner to remove this sawdust.
Use a clean, slightly damp cloth to clean
the plastic parts of the machine. Do not use
solvents or similar products which could
damage the plastic parts.
WARNING: Do not attempt to clean by
inserting pointed objects through openings in
the machines casings etc. The machines air
vents should be cleaned using compressed
dry air.
18
All manuals and user guides at all-guides.com
®
ENVIRONMENTAL PROTECTION
ENVIRONMENTAL PROTECTION
GB
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
www.evolutionfury.com
GB
Publicité
Table des Matières
