Labels & Symbols; Vibration Level - Evolution RAGE 6 Manuel D'instructions

www.evolutionpowertools.com
LABELS & SYMBOLS
Symbol Description
V Volts
A Amperes
Hz
Hertz
Min
-1 Speed
~ Alternating current
n o No load speed
Wear safety goggles
Wear ear protection
Do not touch
Wear dust protection
CE certification
Waste electrical and
electronic equipment
WARNING:
Do not operate machine if
warning and / or instruction labels are missing
or damaged. Contact Evolution Power Tools for
replacement labels.
Only use genuine Evolution replacement
saw blades. Unauthorized blades may
be dangerous! Keep saw blades securely
fastened. Check the blade flanges for debris
before installing any new blade. Do not use
dull, broken or damaged blades. Check the
blade regularly for condition and wear. A
damaged or worn blade should be replaced
immediately. Beware of ejecting chips as
they may be HOT. Always make provision for
the safe handling of excess material. Keep
machine base and rotary table free from dirt
and other debris.

VIBRATION LEVEL

The declared vibration total value has been
measured in accordance with a standard test
method and may be used for comparing one
tool with another.
The declared vibration total value may also be
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during
actual use of the power tool can differ from the
declared total value depending on the ways
in which the tool is used. The need to identify
safety measures and to protect the operator
are based on an estimation of exposure in the
actual conditions of use (taking account of all
parts of the operating cycle, such as the times
the tool is switched off, when it is running idle,
in addition to trigger time).
To obtain an additional copy of your manual,
please contact Evolution Power Tools at:
UK: +44 (0)114 251 1022
WEB: www.evolutionpowertools.com
7
EN
FR
IT
NL