Health Advice - Evolution RAGE 6 Manuel D'instructions

www.evolutionpowertools.com
17) Avoid unintentional starting.
Ensure switch is in "off" position before
plugging in the machine.
18) Use proper extension leads. When the
tool is used outdoors, use only extension leads
intended for outdoor use and labelled as such.
19) Stay alert. Concentrate on what you are
doing, use common sense and do not operate
the tool when you are tired.
20) Check that no part is damaged.
Before using a tool, make sure that it is in
good working order. Check the alignment and
condition of moving parts, mounting and any
other aspect that may affect its operation. A
guard or other part that is damaged should be
properly repaired or replaced by an authorised
service centre unless otherwise indicated in
this instruction manual. Do not use the tool if
the switch does not turn on and off.
WARNING.
21)
The use of any accessory or
attachment other than one recommended in
this instruction manual may present a risk of
personal injury.
22) Have your tool repaired at an
authorised service centre. This electric tool
complies with current safety rules. Repairs
should only be carried out by an authorised
service centre using original spare parts.
Failing this, the user could expose themselves
to considerable danger.

HEALTH ADVICE

WARNING:
When drilling, sanding, sawing
or grinding, dust particles will be produced. In
some instances, depending on the materials
you are working with, this dust can be
particularly harmful to you (e.g. lead from
old gloss paint).You are advised to consider
the risks associated with the materials you
are working with and to reduce the risk of
exposure.
You should:
•
Work in a well-ventilated area.
•
Work with approved safety equipment, such
as dust masks that are specially designed to
filter microscopic particles.
ADDITIONAL SAFETY INSTRUCTIONS FOR
YOUR MITRE SAW
WARNING:
Be sure to read and understand
all instructions. Failure to follow all instructions
listed below may result in electric shock, fire
and/or serious personal injury.
1) Know your power tool. Read operator's
manual carefully. Learn the applications and
limitations, as well as the specific potential
hazards related to this tool.
2) Always wear safety glasses or eye
shields when using this mitre saw. Everyday
eyeglasses have only impact-resistant lenses;
they are not safety glasses.
3) Always protect your lungs. Wear a face
mask or dust mask if the operation is dusty.
4) Always protect your hearing. Wear
hearing protection during extended periods
of operation.
5) Inspect the machines power cord
regularly and if damaged have it repaired
or replaced. Always be aware of the cords
location.
6) Always check for damaged parts. Before
further use of the tool, a guard or other part
that is damaged should be carefully checked
to determine if it will operate properly and
perform its intended function. Check for
misalignment or binding of moving parts,
breakage of parts, and any other condition
that may affect the tool's operation. A guard or
other part that is damaged should be properly
repaired or replaced at a qualified service
centre. Keep guards in place and in working
order.
7) Do not abuse the cord. Never use the
cord to carry the tool or pull the plug from the
outlet. Keep cord away from heat, oil, sharp
edges or moving parts. Replace damaged
cords immediately. Damaged cords increase
the risk of electric shock.
9
EN
FR
IT
NL