Internet (Using The Latitude Usb Ethernet Adapter) - Boston Scientific Latitude Communicateur Manuel Du Propriétaire

Internet (using the LATITUDE USB Ethernet
Adapter)
Contact your health care provider to obtain a new or
replacement LATITUDE USB Ethernet Adapter.
Complete the steps below to set up the Communicator
for an Internet (LATITUDE USB Ethernet Adapter)
connection.
6
Figure 6. Using a USB Ethernet Adapter Connection
1. Insert the AC adapter (included) into the jack
labeled
2. Plug the AC adapter into an electrical outlet that is
easily accessible.
• The LATITUDE indicator will flash yellow for up
to one minute.
• All the Communicator indicators will light for
approximately one second.
• If the LATITUDE indicator is not lit, check that
both ends of the AC adapter are plugged in
firmly. Check if the light on the AC adapter is lit.
Important: For the following steps, make sure
you use the Ethernet cable provided with the USB
26
LATITUDE
Adapter light
.
Communicator Patient Manual
™