Setting Switches For Pbx Or Dial-Out Numbers - Boston Scientific Latitude Communicateur Manuel Du Propriétaire

Table des Matières

Publicité

Setting Switches for PBX or Dial-out Numbers

(This section applies only to standard telephone
connections.) You can use your Communicator with
a private branch exchange (PBX) in a managed
care facility, hotel, or other location that requires
you to enter a dial-out number or prefix to place
an outside call. The first three white switches (1, 2,
and 3) on the bottom of the Communicator must be
set to match your dial-out number. If using the USB
Cellular Adapter or Internet (LATITUDE USB Ethernet
Adapter), switches 1-3 do not matter.
Switch settings for different dial-out numbers are
shown in "Figure 9. Dial-out Number Switch Settings"
on page 66. Refer to "Confirming Switch Settings"
on page 17 for information on switches 4-8.
Dial-out
Number
None
0
1
7
Figure 9.
Dial-out Number Switch Settings
66
LATITUDE
Communicator Patient Manual
Dial-out
Number
8
9
*99

Publicité

Chapitres

Table des Matières
loading

Table des Matières