Turbo-V 750/850 Twistorr Pumping System With Integrated Controller - Agilent Technologies Turbo-V 750 TwisTorr Mode D'emploi

Turbo-V 750/850 TwisTorr Pumping System with
Integrated Controller
To fix the fan to the Turbo-V 750/850 TwisTorr Pumping System
execute the following procedure:
1
Figure 67
2
3
Turbo-V 750/850 TwisTorr User Manual / 87-901-020-01
Insert the connection cable with the plug in the connection P2 on
the integrated controller;
Position the fan ensuring that the holes in the plate line up with
those in the pump base (make sure that the cable remains
between the fan and the pump body, internally to the plastic
shroud);
Insert the three screws enclosed into the package and tighten
with a screwdriver.
Technical Information
Air Cooling Kit Installation
(A)
17
375/406