General Information - Agilent Technologies Turbo-V 750 TwisTorr Mode D'emploi

General Information

This equipment is destined for use by professionals. The user should
read this instruction manual and any other additional information
supplied by Agilent before operating the equipment. Agilent will not be
held responsible for any events occurring due to non-compliance, even
partial, with these instructions, improper use by untrained persons,
non-authorized interference with the equipment or any action contrary
to that provided for by specific national standards.
The Turbo-V 750/850 TwisTorr Pumping System is an inte-grated system
with a turbo-molecular pump for high and ultra-high vacuum
applications with its relevant controller. The system can pumps any type
of gas or gas compound. It is not suitable for pumping liquids or solid
particles.
The pumping action is obtained through a high speed turbine (max.
49500 rpm) driven by a high-performance 3-phase electric motor. The
Turbo-V 750/850 TwisTorr Pumping System is free of contaminating
agents and, therefore, is suitable for applications requiring a "clean"
vacuum.
It is equipped with auxiliary connectors to supply an additional fan, to
control the additional purge/vent block and to be controlled from a
remote site by means of a host computer connected through a serial line
(RS232 or RS485).
The following paragraphs contain all the information necessary to
guarantee the safety of the operator when using the equipment. Detailed
information is supplied in the appendix "Technical Information".
Turbo-V 750/850 TwisTorr User Manual / 87-901-020-01
Instructions for Use

General Information

(A)
16
289/406