P2 - External Fan; J1 - In-Out - Agilent Technologies Turbo-V 750 TwisTorr Mode D'emploi

P2 – External Fan
This is a dedicated 48 Vdc connector (M12) to supply the optional
external fan.
Figure 41
J1 – In-Out
Figure 42
This connector carries all the input and output signals to remote
control the Turbo-V 750/850 TwisTorr Pumping System.
It is a 15-pins D type connector; the available signals are detailed in
the table, the following paragraphs describe the signal characteristics
and use.
Turbo-V 750/850 TwisTorr User Manual / 87-901-020-01
Technical Information
Interconnections
(A)
17
341/406