Agilent Technologies Turbo-V 750 TwisTorr Mode D'emploi page 392

17 Technical Information
Pump used with Corrosive Gases – Pump Purging
Figure 82
4
5
Figure 83
6
392/406
Use the previously unscrewed four M
purge/vent device to the pump body.
Turbo-V 750/850 TwisTorr Pumping System: insert the
connection cable with the plug in the connection P1 on the
integrated controller.
Turbo-V 750/850 TwisTorr pump with Rack Controller: add to the
connection cable the proper extension cable (models: 969-6504,
969-6505, 969-6506, 969-6507) needed to reach the controller.
Insert the plug in the connection P1 on the rack controller rear
panel.
Turbo-V 750/850 TwisTorr User Manual / 87-901-020-01
3
x 20 screws to fix the
(A)