Delete User; Change User; Create User; Mode Bt (Bluetooth) - Tunturi C80 Cross trainer Manuel De L'utilisateur

Max HR
- Turn jog wheel and select "Max HR"
- Press jog wheel to open "Max HR" edit
- Turn jog wheel to change default max HR preset as:
when selected Male : 220-age
when selected female : 226-age
- Press jog wheel to confirm and go back to Edit user Menu

Delete User

By selecting the "Delete User" you can:
Delete a user and all its data�
- Turn jog wheel and select the user you want to delete
- Press jog wheel to delete the selected user and go back to setting
menu�
‼ NOTE
• User will be deleted without further prompting

Change user

By selecting the "Change User" you can:
- Select an other pre-set user profile�
- Turn jog wheel and select the user you want to activate
- Press jog wheel to confirm the selected user and go back to setting
menu�

Create user

By selecting the "Create User" you can set up a new user profile.
Maximum of 8 users can be installed�
See Edit user on how to create user�

Mode BT (Bluetooth)

‼ NOTE
• This console can connect with an APP on a smart device by
Bluetooth (iOS & Android).
• Establish the Bluetooth connection only via the connection mode
on the installed APP on your smart device.
Rotate the jog wheel button to choose BT Mode ,and press the button
to set the console into BT mode�
BT Connection
The Bluetooth Module will be turned on and connect BT device
automatically when being in this mode�
Press the jog wheel button or back button to leave this page ,and
Bluetooth Module will be turned off�
‼ NOTE
• Tunturi only provides the option to connect your fintess console
throughout a bluetooth connection� Therefore Tunturi cannot be
held resposible for damage, or malfunctioning of products other
than Tunturi products�
• Check the website for extra information. www.Tunturi.com

Cleaning and maintenance

The equipment does not require special maintenance� The equipment
does not require recalibration when it is assembled, used and serviced
according to the instructions�
⚠ WARNING
• Do not use solvents to clean the equipment�
- Clean the equipment with a soft, absorbent cloth after each use.
- Regularly check that all screws and nuts
are tight�
- If necessary, lubricate the joints�

Defects and malfunctions

Despite continuous quality control, defects and malfunctions caused
by individual parts can occur in the equipment� In most cases, it will be
sufficient to replace the defective part�
- If the equipment does not function properly, immediately contact the
dealer�
- Provide the model number and the serial number of the equipment
to the dealer� State the nature of the problem, conditions of use and
purchase date�
Trouble shooting:
- When the display of LCD is dim, it means the batteries need to be
changed�
- If there is no signal when you pedal, please check if the cable is well
connected�
‼ NOTE
• When stop training for 4 minutes, the main screen will be off�
• If the computer displays abnormally, please re-install the batteries
and try again�
Squeaking rollers
- Regular Usage: Apply 2cc. of the lubricant on each protruding rail
surface every three months�
- When sliding wheels are making noise during sliding movement,
apply 2cc� of lubricant on each protruding rail surface immediately�
⚠ CAUTION
• We recommend to use a silicon based lubricant�
• Do not apply too much lubricant or wipe off redundant lubricant
with a clean cloth as too much lubricant can cause carpet stain or
dirt particle�
Shaky or unstable feeling during use
If the machine feels unstable or unstable during operation, it is
advisable to adjust the support feet to bring the frame to the correct
height� Read the instructions in this manual in section: "Use"

Transport and storage

⚠ WARNING
• Carry and move the equipment with at least two persons.
- Remain standing in front of the equipment on each side and take a
sturdy grip at the handlebars� Tilt the front of the equipment so as
to lift the rear of the equipment on the wheels� Move the equipment
and carefully put the equipment down� Place the equipment on a
protective base to prevent damage to the floor surface�
- Move the equipment carefully over uneven surfaces� Do not move the
equipment upstairs using the wheels, but carry the equipment by the
handlebars�
- Store the equipment in a dry place with as little temperature variation
as possible�
2 7
English