Vercise™ Neural Navigator Programming Manual
Once a connection has been established between the CP and the Stimulator, the following screen
will appear (See Figure 3):
Figure 3. Connection established between CP and Stimulator
#
Feature
Description
1
Patient ID
Displays the Patient ID number
2
Connection
Displays the connection status between the CP, Wand and Stimulator along
Status
with the Model and Serial Number of each of the devices
#
1
2
3
3
Rescan
Scan for available Stimulators. Disabled if CP is already connected to the
Button
Stimulator.
Vercise™ Neural Navigator Programming Manual
91046489-05
4 of 557
Connection Status
Description
Connection between CP, Wand and
Stimulator was established.
Connection between Wand and
Stumulator not established. Move
the Wand closer to the Stimulator
and Rescan.
Connection between CP, Wand and
Stimulator not established. Check
the USB cable connections to the
Wand and refer to the Vercise DBS
Programming Wand Manual for more
information.