Boston Scientific Vercise Neural Navigator Mode D'emploi page 13

Creating or Modifying a Program
To create a new program or modify an existing program, select the Program Button and choose
one of the four programs from the drop down menu. The system allows you to configure up to
4 Programs on a Stimulator.
The Program Options include:
# Feature
1 Battery
2 Ramp
3 Cycle
4 Copy to
5 Delete
Selecting Stimulation Areas
For a given Program, you may configure up to 4 areas. With a new Program, an Area will be
assigned to each Lead Port and named based on the defined Target and side of the brain selected
in the Configure Tab. You may add an additional Area by selecting an empty Area (+) and
choosing a Lead Port configuration (e.g. Left STN). You may reassign an Area by first selecting
Delete to clear the setting for that Area and choosing a different Lead Port configuration.
Description
Energy Use Index for the current program. This value is used to provide
an estimate of battery longevity for the current program on a new PC
Stimulator. See the "Energy Use Index" section for more information.
Time to gradually increase the stimulation from zero to the programmed
amplitude when Stimulation is turned ON.
Default
ON
The cycled on and off duration of stimulation delivery
Default
ON
Copy the current program settings to another program
Delete the settings for the current program
Programming the Stimulator
Options
ON/OFF
Options
ON/OFF
Vercise™ Neural Navigator Programming Manual
91046489-05
Range
1 sec - 10 sec
Range
1 sec - 90 min
9 of 557