Table des Matières
Publicité
Connecting to the Stimulator
Upon starting Vercise Neural Navigator, the screen will show the Connect Tab and the software
will automatically attempt to connect to a Stimulator (See Figure 2). If no Stimulator is found, move
the Wand closer to the Stimulator that you are trying to connect to and click the Rescan button.
#
Feature
1
Connect Tab
2
Configure Tab
3
Program Tab
4
Report Tab
5
Tools Tab
6
End Session Tab
7
Battery Indicator
Figure 2. Connect Tab
Description
Displays the connection status between the CP, Wand, and Stimulator.
Configure leads and edit patient profile.
Adjust the Stimulator program settings.
Generate, print and export reports.
Enable new leads, backup or delete patient data.
Disconnect from the Stimulator or exit the application.
Displays the battery status of the CP.
Vercise™ Neural Navigator Programming Manual
Starting a Programming Session
91046489-05
3 of 557
Publicité
Table des Matières
