Full-Length Safety Sides - arjo Minuet 2 Notice D'utilisation

Full-length safety sides

Always use the 4mm and 5mm Allen (hexagon) keys supplied when fitting
the socket head screws. Using other tools may result in the screws not
being fully tightened.
These instructions illustrate the fitting of wooden extra height safety
sides model CM-ACC00-1.14. The other models of full-length safety
sides are fitted and used in the same way. Extra height safety sides
should be used when the mattress thickness is between 150mm and
172mm (Refer to page 12).
Full-length safety sides are supplied as identical pairs. They can be attached to
either side of the bed.
Installation
A
WARNING
Position the safety side on the bed.
Line up the fixing holes on the edges of the
bed end panels with the top fixing holes in
the safety side end pillars.
Attach the safety side to the end panels
with the two M6 x 80mm socket head
screws (A), but do not tighten them fully at
this stage.
26