arjo Minuet 2 Notice D'utilisation page 52

Stand the end panel sections,
assembled onto the transit brackets,
upright on their castors.
Slide the head end mattress platform
11
section (E) down onto the short
uprights (F) on the transit brackets.
Slide the foot end mattress platform
section (G) down on to the tall
uprights (H) on the transit brackets.
Place the cardboard packing block (J)
between the two mattress platform
sections.
Fasten a plastic cable tie (K) around
12
the packing block and mattress
platform sections to hold them
together.
Check that no cables are trapped
between the bed sections and/or the
transit brackets.
Refit the remaining two M8 socket
head screws into the threaded holes
in the head end mattress platform
section for safe storage.
13
Wrap the control handset and all
accessories in suitable protective
packaging. The bed is now ready to
be transported.
J
G
H F
K
E
51