Flexible Handset Holder Cm-Acc13 - arjo Minuet 2 Notice D'utilisation

Flexible handset holder CM-ACC13

Always use the correct 4mm Allen (hexagon key) when fitting the socket
head screws. Using other tools may result in the screws not being fully
tightened.
Installation
The clamp plate is not symmetrical. Ensure the screw holes are
correctly positioned as shown.
The flexible handset holder is designed to
position the control handset within easy
reach of the patient. It also allows the
controls to be operated by a patient with
limited gripping ability.
The flexible handset holder is fixed to the
bed frame with a two-piece clamp and may
be fitted to either side of the bed. These
instructions show the accessory fitted to the
right hand side of the bed, when viewed
from the head end.
WARNING
A
Choose which side of the bed the
handset holder is to be installed.
Position the clamp plate (A) on top of the
bed frame, placing it between the two
central seat section bars as shown.
39