Assembling The Bed - arjo Minuet 2 Notice D'utilisation

Assembling the bed

1
2
Remove the two socket head screws (B) from one of the transit brackets
(A). Remove the second transit bracket, taking care not to allow the end
panel sections to fall. Keep the four socket head screws safe.
Two other socket head screws are fitted to holes in the mattress platform
sections – remove these before starting assembly. The six socket head
screws will be used in assembling the bed.
Store the two transit brackets and packaging in a safe place.
Do not allow the end panel sections to fall when the transit brackets are
removed.
The bed is supplied in four main
sections, fixed together on two transit
brackets (A) for ease of transportation.
Remove the cardboard packing block
and plastic tie between the mattress
platform sections.
Lift the two mattress platform sections off
the transit brackets and lay them on the
floor. The foot end mattress platform
section must be lifted off the transit
brackets before the head end section.
A
B
A
WARNING
B
14