arjo Minuet 2 Notice D'utilisation page 36

Installation
Insert the lifting pole vertically
downwards into one of the two
accessory sockets (C) at the head end
of the bed. Twist the pole until you feel it
drop slightly in the socket.
C
Make sure the lifting pole cannot rotate
in the socket and that the horizontal part
of the pole is positioned above the
centre of the bed.
Fit the loop of the lifting strap (D) over
the horizontal part of the pole. Make
sure the loop lies between the two pegs
D
(circled) on the lifting pole.
To adjust the height of the handle above
the bed, press and hold the button (E)
on the side of the handle. Pull the
E
handle down to lengthen the strap, or
allow the strap to retract back into the
handle to shorten it. Release the button.
35